WIA WELDMATIC 350i
Industrial Multi-Process Welding Solution
This 350 Amp three phase multi-process inverter suits MIG, Stick, Arc Air Gouging and Lift-Arc TIG welding and is ideal for medium to heavy fabrication, and all general industrial fabrication applications.
Variable Arc Control
The package features allow full control of the arc. Infinite voltage control and arc control to adjust arc harshness, and arc start to control the wire starting speed.
Built in VRD delivers added safety when operating in Stick or Lift-TIG mode and meets the requirements of site work. Fully compliant to Australian Standards AS 60974.1 & AS1674.2 CAT C.
Flexibility & Power
Optimal weld characteristics provide high quality results on steel, stainless steel and aluminium, plus the power to comfortably run all popular sizes of solid and flux cored wires. With the capacity to run 1.6mm flux cored wire, the 350i can handle a wide range of applications.
Built-In Operator Safety
The power source features a built-in thermal protection device that will cut in if the machine is operated beyond its safe thermal operating zone.
Digital Volt and Amp meters retain last weld information and allow precise set-up.
Gas or Gasless
Suits gas shielded and flux cored wires.
Comes with a 32 Amp Supply Plug
5kg & 15kg
3 Year Gold Shield Warranty
Every Weldmatic machine is backed by WIA’s industry leading ‘Gold Shield 3 Year Warranty’, covering parts and labour, and supported by an Australia wide service network. You can be guaranteed you’re buying reliability and performance. For details, refer to the Weldmatic warranty statement.
W66 4 Roll Drive Heavy Duty Wirefeeder
Interconnecting Lead (10m)
Euro Gun Cable (3.6m) with Bernard Centerfire 0.9mm Tip
Work Lead (10m) with Heavy Duty G Clamp Industrial
Twist Lock Electrode Holder (3m)
Gas Regulator Drive Rollers – 0.9/1.2 & 1.2/1.6mm V Groove 0.9/1.2 & 1.2/1.6mm Knurled
Trolley with Drawer
PRIMARY VOLTAGE : 380/415 Vac - 50/60 Hz 3 Phase
RATED PRIMARY CURRENT : 19.4 AMPS
MAX. PRIMARY CURRENT : 25AMPS
REC. GENERATOR kVA : 15KVA
RATED OUTPUT @ 40C (10 MIN) : Stick (MMA) 350 A, 34 V, 60% Duty Cycle 271 A, 30.8 V, 100% Duty Cycle
TIG 350 A, 24 V, 60% Duty Cycle 271 A, 20.8 V, 100% Duty Cycle
MIG 350 A, 31.5 V, 60% Duty Cycle 271 A, 27.6 V, 100% Duty Cycle
WELDING CURRENT RANGE : 25-350AMPS
WIRE / ELECTRODE SIZE RANGE (MM) Carbon Arc Max. 6mm
0.9 - 1.6 solid 0.9 - 1.6 cored
SHIPPING WEIGHT :116KG