KEMPPI MASTERTIG 335 AC/DC TIG WELDER - LIQUID COOLED

FASTER SETUP

Weld Assist guides you towards the optimal setup, therefore ensuring easy and productive welding

INCREASED WELDING SPEED

Double Pulse function accelerates welding speed and additionally lowers heat input by 20%

LOWER NOISE LEVELS

MasterTig reduces noise levels compared to leading competitors in AC welding applications

Features of the Kemppi MasterTig 335 AC/DC Liquid Cooled Tig Welder

Double Pulse - Double Pulse combines alternative pulse cycles for 30% faster welding speed and 20% reduced heat input, therefore lowering distortion levels and weld costs. Additionally, Double Pulse is ideal for DC hand welding and mechanized applications and offers superb weld seam appearance.

Optima AC - Optima AC is a customized AC TIG waveform that combines the best of the traditional sine and square waveforms, therefore ensuring an optimal AC welding experience. Depending on the application, you’re free to choose either sine, square, or the quiet one: Optima AC.

MicroTack - MicroTack offers fast and accurate tacking with minimum heat input in both DC and AC TIG welding. Ideal for multiple, repetitive tacking on thin sheet applications where a consistent and controlled appearance is paramount, MicroTack can be set between 1 to 5 repeat pulse cycles or continuous cycle mode. Additionally, the welding current level is set independently and the arc cycle time selected between 1 to 200 ms.

iTEC is engineered ignition technology for reliable arc starts. Particularly useful with long torch extensions for site welding or precise thin materials and low current applications, you can set the variable spark force energy

Auto Pulse - Easy and convenient, the only value to adjust is the welding current itself, therefore making Auto Pulse ideal for applications in DC current.

AutoCool - Dynamic gas and water cooling ensures optimal temperature control and power efficiency. Depending on the welding power level and duration, the power source cooling fans moderate air flow and cooler motor run times between 15 seconds and 4 minutes, therefore reducing electrical power consumption and localized noise levels.

Weld Assist - Follow simple on-screen steps, selecting material, thickness, joint type, and position, and meanwhile, Weld Assist sets the right parameters for easy and productive welding. It also gives recommendations for electrode size, filler wire, gas flow, groove type, pass profile, and travel speed. Perfect for pWPS creation.

What's Included

• MasterTig 335 AC/DC Power Source
• MTP35X Panel
• Flexlite TX335W8 8m Liquid Cooled Tig Torch
• MasterTig Cooler M
• 5m Earth Cable

Technical Secifications of the Kemppi MasterTig 335 AC/DC Liquid Cooled Tig Welder

POWER SOURCES 335

• Connection voltage 380 ... 460 V
• Fuse 16 A
• Stick electrode sizes 1.6 - 6.0 mm
• Recommended generator power (min) 20 kVA
• Open circuit voltage (average) 50 V
• Operating temperature range -20...+40 °C
• Weight (no accessories) 35kg
• Degree of protection IP23S
• Standards IEC 60974-1,-3,-10 IEC 61000-3-12 GB 15579.1
• EMC class A
• Rated maximum output at 40 °C (40 % TIG) 300 A / 22 V
• Rated maximum output at 40 °C (60 % TIG) 230 A / 19.2 V
• Rated maximum output at 40 °C (100 % TIG) 190 A / 17.6 V
• Range of output 3 A / 1 V ... 300 A / 38 V
• Range of output 10 A / 10 V ... 250 A / 39 V